Wednesday, November 13, 2019

Essay --

How to change the oil and filter on a 1993 VW Corrao VR6 The following instructions are recommended for changing the motor oil on a 1993 Corrado with a 6-cylinder VR6 motor type. Oil changes are necessary to ensure proper lubrication for the engine during use, usually ranging from every 3,000 to 5,000 miles. Over time, the oil breaks down and may cause excess wear on internal parts. The oil filter should also be changed at this time, due to any particles the filter may have caught from the old oil. Depending on your level of mechanical ability and weather conditions, this process should take about an hour or less. Please read all instructions thoroughly before attempting any maintenance. New parts: 6 quarts of oil 1 filter Tools: Floor jack Container for old oil A 6mm Allen wrench for oil filter plug 36mm socket for oil filter housing 19mm socket for drain plug on pan Socket wrench (3/8† or 1/2† is fine) Torque wrench Steps: 1. Warm up the engine by driving around for a few minutes. This will warm up the oil and will decrease the amount of time the oil needs to drain. 2. Park the ...

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.